Variable 400V DC power supply – part I.

Variable 400V DC power supply – part I.

January 30, 2021Posted inSTM32 Arm
Experimentation with vacuum tubes requires a high voltage power supply, typically 200-400V DC. Most hobby labs are not equipped with such a device. This step-up converter allows you to boost up your benchtop 0-24V variable DC power supply to a high voltage power supply.
High resolution PWM signal generation for RC servos with STM32

High resolution PWM signal generation for RC servos with STM32

November 26, 2018Posted inSTM32 Arm
Currently, I'm building an RC transmitter/receiver based on the SX1280 RF chip. One of the goal for the project is that I want 12 bit servo resolution from the sticks all away down to the servos. Partly because modern digital servos have 12 bit resolution secondly a high-end transmitter is using 12 bits anyway. I…